Appendix A-1-5 Cautions On Using Transparent (2-Port) Function Of Got-F900 Series - Mitsubishi Electric FX3G SERIES Programming Manual

FX /FX /FX Series Programmable Controllers
3G 3U 3UC
Programming Manual - Basic & Applied Instruction Edition
Appendix A-1-5 Cautions on using transparent (2-port) function of
GOT-F900 Series
Make sure to provide the following setting when monitoring circuits, device registration, etc. in an FX
PLC using GX Developer Ver. 8.18U or later (Ver. 8.72A or later in an FX
of the GOT-F900 Series.
If the following setting is not provided, write to PLC, read from PLC, verify with PLC, etc. operate normally, but
monitoring (ladder monitor, entry data monitor, etc.) cannot be normally executed.
When using transparent
function in GOT-F900
Series
When directly
connecting GX
Developer to PLC
(standard built-in RS-422
port)
*1. GX Developer Ver.8.18U or later supports the FX
*2. GX Developer Ver.8.72A or later supports the FX
Setting in GX Developer Ver. 8.18U or later (Ver. 8.72A or later in FX
1. Select [Online] → [Transfer setup...] to open "Transfer Setup" dialog box.
2. Double-click [PLC module] in [PLC side I/F] to open [PLC side I/F Detailed setting of PLC
module] dialog box.
3. Put a check mark in the check box [via GOT-F900 transparent mode] as shown below.
4. Click [OK] button to finish the setting.
GX Developer
*1
Ver.8.12N or earlier
Setting shown below is not
required.
Set "COM port" and "Transmission speed" on "PC side I/F
Serial setting" dialog box.
Double-click it.
A Programming Tool Applicability and Version Upgrade History
PLC) and the transparent (2-port) function
3G
GX Developer
GX Developer Ver.8.22Y or later
Ver.8.18U or later
Setting shown below is Select "RS-232C" on "PC side I/F Serial setting"
required. dialog box, and execute settings shown below.
Select "RS-232C" on "PC side I/F Serial setting"
dialog box, and set "COM port" and
"Transmission speed".
Series.
3UC
Series.
3G
Put a check mark in the
check box "via GOT-F900
transparent mode".
A-1 Programming Tool Applicability
/FX /FX
3G 3U
*2
PLC)
3G
901
31
3UC
32
33
34
35
36
37
38
A
B