Permission For Conditional Call Forwarding; Dialing Mode - Siemens HiPath 1100 Programming Manual

Step by step
q
fhk
q
w
r
To enable or deactivate permission for call forwarding -
or
Busy:
q
= Activated
r
= Deactivated (default)
w
p
Enter the next extension number
or
w
r
Press this key.
Initial status for programming mode.
Permission for conditional call for-
warding
This allows an extension to forward a call to an external
line.
Required: Programming mode must be activated (*95
31994).
w
Enter the programming code.
w
p
Enter the extension number (e.g., 12/102).
w
r
To enable/deactivate permission for external line call for-
or
warding:
q
= Activated (default)
r
= Deactivated
w
p
Enter the next extension number
or
w
r
Press this key.
Initial status for programming mode.

Dialing mode

Urgent call and callback when busy facilities do
not work when call forwarding - busy and call for-
ward no answer are activated.
If the extension called is configured to use Do
not disturb and call forwarding - Busy then the
call will be forwarded. If Do not disturb is activat-
ed at the destination to which the call is forward-
ed, the caller will hear a busy signal.
Programming an extension
75