Assigning A Digital Line To An Msn - Siemens HiPath 1100 Programming Manual

Step by step
dkk
q
dkl
dde . ehd
dde . ehd
dkl
dde . ehd
dde . ehd
For information on which ISDN functions can be con-
trolled on your country, ask your local carrier.
Required: Programming mode must be activated (*95
31994).
w
Enter the programming code.
w
r
Activate/Deactivates the Automatic Keypad:
or
q
= Activated
r
= Deactivated (default)
w
Initial status for programming mode.

Assigning a digital line to an MSN

This features allows you to assign the MSNs provided
by your local carrier to calls made to digital lines.
By default, all digital lines are assigned to MSNs.
Required: Programming mode must be activated (*95
31994).
w
Enter the programming code.
w
Enter MSN slot (001 ... 140).
w
p
Enter a number for an external digital line (e.g: 801).
w
Enter the next MSN position.
or
w
r
Press this key.
Initial status for programming mode.
Deleting assigned external lines
Required: Programming mode must be activated (*95
31994).
w
Enter the programming code.
w
Enter MSN slot (001 ... 140).
w
q
The selected external line is deleted.
w
Enter the next MSN position.
or
w
r
Press this key.
Initial status for programming mode.
Digital trunk settings
153