10.00 CO Access Control
Description
The attendant can control CO lines to prevent
them from being accessed from extensions by
employing CO Management screen.
If CO busy out is assigned to a CO line, both
extensions and attendant consoles cannot access
the line.
Refer to Section 3-F-8.00 "CO Busy Out" for
further information.
If CO access control is assigned to a CO line,
extensions cannot access the line.
CO busy out can also be set by dialing the
feature number for "Busy Out Trunk".
Programming
System Programming
"System-Numbering Plan (9/11)",
Busy Out Trunk
Unbusy Trunk
Conditions
None
Reference
VT
Dumb
10-D-6.09 11-C-11.00
6-J-23
Operation
Setting CO busy out by dialing the feature
number
1. Press an idle LOOP key.
LOOP
• The SRC indicator lights and
dial tone sounds.
2. Dial the feature number for "Busy
Out Trunk" (Default: *77) and
trunk port physical number in
succession.
• Confirmation tone sounds and
the LOOP key is released
automatically.
(Supplement)
To cancel "CO Busy Out", dial the feature number
for "Unbusy Trunk" (Default: #77) and trunk port
physical number in succession.