Other Conditions
The following tabular listings of items by trunk group type shows the items that
cannot be assigned ("—" is displayed) when Incoming/Outgoing mode of the trunk
group is set to "Both-Way (default)".
Trunk Group(1/3)
Type
Incoming/Outgoing
Incoming Mode(Day)
Incoming Mode(Night)
Intercept Routing(Day)
Intercept Routing(Night)
Trunk Group(2/3, 3/3)
Destination (DIL 1:N Only)
Type and Number
DID Digit Modification Table
PBX Access Code (No Restriction)
PBX Access Code (Restriction)
CO-TIE Restriction
TIE-CO Restriction
TIE Forced Account Code Mode
TIE Incoming Delete Digit
TIE Incoming Insert DIal
* Incoming/Outgoing mode of the trunk group with DID can be assigned to "Both-
Way", "Incoming Only", or "Outgoing Only". However, please select "Incoming
Only" if DID lines are available with only receiving incoming calls in your area.
[Note]
When "Incoming Only" is selected in the trunk group with DID, the following items
are assignable but they do not work at all in Incoming Only mode.
• Disconnect Time
• Hook Switch Flash Time
In some areas, DID lines can be used for both receiving incoming calls and making
outside calls. Both-way DID card (KX-T96182D) is provided for this usage.
Detailed information on KX-T96182D is described in Reference Guide for KX-
T96182D.
DDD
FEX
WATS
ATT (1/2) or
DIL 1:1
FLEXIBLE
blank
blank
blank
–
–
–
Yes
–
–
–
–
• Pause Time
• Max. Dial No. after EFA Signal
10-E-6
PVL
PBX
Both-Way
ATT (1/2) or
–
DIL 1:1
–
FLEXIBLE
blank
blank
blank
blank
–
blank
–
–
–
blank
–
blank
Yes
Yes
–
–
–
–
–
–
–
–
DID
TIE
–
–
–
–
blank
–
blank
–
–
blank
blank
–
–
–
–
–
Yes
–
–
Yes
–
No
–
0
–
blank