Panasonic KX-TD500 System Reference Manual page 336

14.01 Calling from Tie to Tie
Description
(1) By dialing Extension Number only
Description
Programming example: To make up the Tie Line Network above, the following system programming is
PBX-1
PBX-2
Tie calls among several different company locations can be done by dealing a 3
or 4-digit extension number only, or by dialing a location number (PBX Code)
and an extension number.
Extension users can make a call via tie line to other extension users in other
PBXs within a private network by simply dialing a 3 or 4-digit extension number.
A Network of Tie Lines
PBX-1
PBX Code: None
Tie Line
TG10
Extension numbers
100 ~ 199
Ext. 100
Call Flow
1. Ext.100 dials 200.
2. Ext.100 is connected to Ext.200 of PBX-2.
required at PBX-1 and -2 respectively.
• System - Operation (1/3)-PBX Code: (Blank)
• System - Numbering Plan (10-D-6.00, 11-C-11.00)
1st Hundred Extension
Other PBX Extension 01
• Special Attended - TIE Line Routing Table (10-I-4.00, 11-C-57.01)
Delete
No. Code
Digit
0
01 2XX
• System - Operation (1/3)-PBX Code: (Blank)
• System - Numbering Plan
1st Hundred Extension
Other PBX Extension 01
• Special Attended - TIE Line Routing Table
Delete
No. Code
Digit
0
01 1XX
3-F-76
PBX-2
PBX Code: None
TG10
Extension numbers
200 ~ 299
Ext. 200
1
2
Trunk Group Hunt Sequence
Insert
Dial
01 02
10
2
1
Trunk Group Hunt Sequence
Insert
Dial
01 02
10
03 04 05
03 04 05