9.00 Trunk Verify
Description
Allows the attendant to verify the status of
specified trunk.
The TRG key (programmable key) must be
assigned to the attendant console.
Programming
System Programming
"System-Operation", PITS
Programming Password
Attendant Management
TRG key
Conditions
The attendant can place a call by specifying a
trunk but cannot hold or transfer it.
When specified trunk is busy, busy tone sounds.
Verifying a trunk can be done only when a call is
placed from SRC side.
Reference
VT
Dumb
10-D-1.03
11-C-4.00
Reference
6-C-10.00
6-J-22
Operation
1. Press an idle LOOP key.
LOOP
• The SRC indicator lights and dial
tone sounds.
2. Press the TRG key (programmable
TRG
key).
3. Dial " ".
*
4. Dial the four-digit password
(PITS programming password).
5. Dial the desired trunk port physical
number (five digits)
• Another dial tone sounds, and the
specified trunk is seized.
1 The PITS programming
password is used for PITS
programming and Trunk Verify.
2 Refer to Section 15-F-4.00
"Testing the Ports" for details
about trunk port physical
number.
1
2