Panasonic KX-TD500 System Reference Manual page 1018

Hide thumbs Also See for KX-TD500:

Table of Contents

Description of Assigning Items

It is possible to change assigning items in "System-Communication Interface" while

On-site administration or Remote administration is performed or SMDR is being

printed out. New setting becomes effective when those operation modes are

The parameters must be the default settings when starting the programming for the

first time using the terminal conected with SIO. The default screen is as follows:

System - Communication Interface

------------------------------------------------------------------------------------ + ----- + ----- + ----- + ------

+ --------------------------------------------------------------------------------- +

| ------------------- + ------------------ + ------------------ + ------------------ |

| Word Length

+ --------------------------------------------------------------------------------- +

Assigns the New Line code, for Carriage Return, for SIO #1 (Terminal),

SIO #2 (SMDR : Station Message Detail Recording) and Remote (MODEM).

Assigns the Baud rate for SIO #1, SIO #2 and Remote. The baud rate is the

number of bits transmitted per second between this system and the

Assigns the data length for SIO #1, SIO #2 and Remote. The data length is the

number of bits required per character.

Assigns the type of Parity check for SIO #1, SIO #2 and Remote. Mark and

space means that there is a fixed polarity parity bit for each character. Even and

odd means that the number of bits including the parity bits is even or odd.

(1,3,5,7,9 etc. is odd 2,4,6,8, etc. is even)

Assigns the number of Stop bit for SIO #1, SIO #2 and Remote. Stop bits are

used to signal the end of a character and that the next bit received is the start bit

of the next character.

| (Terminal)

| OFL | PRG | SCR | SEL

Show Quick Links

Chapters

Table of Contents