Panasonic KX-TD500 System Reference Manual page 873

4.00 Entry of Value by SPACE or
Directly
Entering the value directly or selecting it by
pressing the SPACE key is available.
When "SEL" (Select Input) is displayed at the
right end on the top line, pressing the SPACE key
enables you to select the desired value from
factory programmed parameters.
When the screen displays "DIR" (Direct Input),
enter the appropriate parameters directly.
<Example>
1. (SEL) Select Input by SPACE key
In System-Operation (2/3) screen, the first item is
System Administration Device. To select the
desired device from the four options: VT220/
Dumb/ATT1/ATT2, press the SPACE key. One
of the four options is displayed in the following
order.
VT220 Dumb
To reverse the selection order, press the CTRL
+ U keys simultaneously. One of the four
options is displayed in the following order.
VT220 Dumb
To reverse the selection order again, press the
CTRL + U keys simultaneously.
System-Operation
System Administration Device
SMDR
ATT1 ATT2
ATT1 ATT2
Page Length
Skip Perforation
8-H-3
2. (DIR) Direct Input
1) After entering "Yes" for SMDR, move the
cursor to Page Length field.
• The display "SEL" changes to "DIR".
2) Enter the appropriate number directly from 4
to 99 for Page Length.
When storing the entered data, press the PF2 or
PF4 key.
SEL or DIR
OFL PRG SCR SEL
Operation (2/3)
VT220
Yes
60
(4-99)
60
(0-95)