Table of Contents
Advertisement
5. Electrical Connections
4.
With the main body laid down, make sure to have at least two persons hold the tray and
lit it up. As shown in the [Figure 5-9], the battery module must be docked to ensure that
the end guide faces the leg of the exterior case of the main body.
When docking the battery, make sure not to have the battery cable caught on the
battery frame. After docking the battery, fasten the screws to fix the tray and the main
body. Make sure to have two persons lift the battery tray.
∙
Use a torque screwdriver of 1.2-1.8N
m to tighten the screws on the battery tray.
[Figure 5-9: Battery Docking description]
Australia (Eng.) 05/2015. Rev1.1
29
Advertisement
Table of Contents
