Table of Contents
Advertisement
3. Package Removal and Inspection
4.
Lift the package.
5.
Open the side support on the bottom.
3.1.2 Removing the Battery Tray Package
As shown in the [Figure 3-2], remove the package for the battery tray.
1.
Open the box cover of the product.
2.
Remove the buffers with a straight pull.
3.
Take out the battery tray by grabbing the handle and pulling it up.
Note: The tray weighs approximately 45 kg, so make sure to have at least two persons lift it.
10
[Figure 3-1: Process for the enclosure package removal]
[Figure 3-2: Process for the battery package removal]
Australia (Eng.) 05/2015. Rev1.1
Advertisement
Table of Contents
