Table of Contents
Advertisement
5. Electrical Connections
5.2 Opening the Front Case Cover
As shown in the [Table 5-3], 3.6 kWh All In One is delivered with the blue front case cover
attached. Remove the front case cover for electrical connections.
Turn the screws (A, B, C, and D)
counterclockwise to assemble.
26
NOTICE
The LCD connector and ground are connected between the top left of the
front cover and the main body. Be careful when you detach the front cover.
Make sure to connect the connector and ground before reassembling the
front cover.
Front View
[Table 5-3: Front Case Open Process]
Side View
1. Pull the lower end turning 15 degree
upwards.
2. Push upward separate the front case
cover from the upper ring.
Australia (Eng.) 05/2015. Rev1.1
Advertisement
Table of Contents
