Tally Lamp; Warning Tone - JVC GY-HM650U Instructions Manual

Error message
Transfer Error.
Invalid URL.
Media Access Error.
Internal Error.
Other Error.
Media Read Error.

Tally Lamp

The tally lamp start blinking when the remaining space on the SD card is running out during recording, or
when the battery power is running low.
Blinking Mode
Blinks slowly
(once every second)
Blinks quickly
(2 times per second)

Warning Tone

Warning tone is output from the monitor speaker and [x] terminal when the battery level is low.
0
Warning tone is also output when an error occurs in the camera recorder.
0
Memo :
You can specify whether to turn on the warning tone as well as setting the volume in [A/V Set] B [Audio
0
Set] B [Alarm Level].
(A P109 [ Alarm Level ] )
162
Status
Transfer failed due to
communication failure.
The path was deemed invalid by the
FTP server.
Reading/writing of the SD card
failed while FTP transfer is in
progress.
An internal error has occurred while
FTP transfer is in progress.
An unknown error or other errors
have occurred while FTP transfer is
in progress.
Reading of the SD card failed while
FTP transfer is in progress.
Remaining Battery Power/SD Card Space
Battery power is low
0
Remaining recording time on SD card is less than 3 minutes (during
0
recording)
Remaining recording time on SD card is zero (during recording)
0
Error on the camera recorder
0
Action
Execute again.
Adjust the Server and Port settings
for [Metadata Server] or [Clip
Server].
(A P116 [ Metadata Server ] )
(A P116 [ Clip Server ] )
Insert a different SD card.
Adjust the settings and execute
again.
Adjust the settings and execute
again.
Insert a different SD card.