JVC GY-HM650U Instructions Manual page 112

HD+SD:
0
Records in "HD" (high definition) for slot A, and
in "SD" (standard definition) for slot B.
HD+Web:
0
Records in "HD" (high definition) for slot A, and
in low definition for slot B.
[Setting Values: RHD, SD, HD+SD, HD+Web]
Caution :
The selectable options for the [WFormat],
0
[WResolution], and [WFrame & Bit Rate]
settings vary depending on the setting of this
item.
9 W Format
For selecting the format of the file to be recorded to
the SD card in slot A.
[Setting Values: RQuickTime(MPEG2),
MP4(MPEG2), MXF(MPEG2), AVCHD]
Memo :
When System is set to "HD" or "SD", the
0
recording file format will be the same for both SD
cards in slots A and B.
When System is set to "SD", this item is fixed at
0
"QuickTime(H.264)".
9 W Resolution
For selecting the image size to be recorded to the
SD card in slot A. (Horizontal x vertical)
The available options vary according to the
[WFormat] and [System] settings.
When MP4(MPEG2) or QuickTime(MPEG2) is
0
selected:
[Setting Values: R1920x1080, 1440x1080,
1280x720]
When QuickTime(H.264) or AVCHD is selected:
0
Fixed at "1920x1080"
When MXF(MPEG2) is selected:
0
[Setting Values: R1920x1080, 1440x1080]
Memo :
When [System] is set to "HD" or "SD", the
0
recording definition will be the same for both SD
cards in slots A and B.
When [System] is set to "SD", this item is fixed
0
as follows.
U model: Fixed at "720x480"
0
E model: Fixed at "720x576"
0
The selectable values of [WFrame & Bit Rate]
0
vary according to the setting of this item.
112
9 W Frame & Bit Rate
For selecting the frame rate and encoding bit rate
for recording to the SD card in slot A when [System]
is set to "HD", "HD+Web", or "HD+SD".
The available options vary according to the
[System] and [WResolution] settings.
When "1920x1080" ([WFormat] is set to
0
"AVCHD") is selected:
[Setting Values: 60i(HQ), 50i(HQ), 60i(SP),
50i(SP)]
(Default values: 60i(HQ) (U model), 50i(HQ) (E
model))
When "1920x1080" ([WFormat] is set to
0
"QuickTime(H.264)") is selected:
[Setting Values: 60i(UHQ), 50i(UHQ),
24p(UHQ)] (Default values: 60i(UHQ) (U
model), 50i(UHQ) (E model))
When "1920x1080" ([WFormat] is set to other
0
than "AVCHD" or "QuickTime(H.264)") is
selected:
[Setting Values: 60i(HQ), 30p(HQ), 24p(HQ),
50i(HQ), 25p(HQ)]
(Default values: 60i(HQ) (U model), 50i(HQ) (E
model))
When "1440x1080" is selected:
0
[Setting Values: 60i(HQ), 50i(HQ), 60i(SP),
50i(SP)]
(Default values: 60i(HQ) (U model), 50i(HQ) (E
model))
When "1280x720" is selected:
0
[Setting Values: 60p(HQ), 30p(HQ), 24p(HQ),
50p(HQ), 25p(HQ), 60p(SP), 50p(SP)]
(Default values: 60p(HQ) (U model), 50p(HQ) (E
model))
Memo :
When "HD+SD" is selected, [Frame & Bit Rate]
0
cannot be selected.
U model:
0
50i(HQ), 50i(SP), 50i(UHQ), 50p(SP),
25p(HQ)
E model:
0
60i(HQ), 60i(SP), 60i(UHQ), 30p(HQ),
24p(HQ), 24p(UHQ)
When [System] is set to "SD", this item is fixed
0
as follows for the different models.
U model: "60i"
0
E model: "50i"
0
When [System] is set to "HD" or "SD", the frame
0
rate and encoding bit rate for recording to the SD
cards in slots A and B will be the same.