System Menu - JVC GY-HM650U Instructions Manual

System Menu

This menu screen allows system-related settings.
For specifying recording settings, formatting and
restoring of SD card, tally lamp settings, network
settings, date/time, time zone, and other settings.
It can also be used to reset the menu settings to
their default values.
Record Set...
For specifying recorded video-related settings.
(A P111 [Record Set Item] )
Media
9 Format Media
For formatting (initializing) an SD card.
Select a card slot (A or B), select [Format] from
[Cancel]/[Format], and press the Set button (R) to
format (initialize) the card.
(A P41 [Formatting (Initializing) SD Cards] )
9 Restore Media
For restoring an SD card.
Select a card slot (A or B), and press the Set button
(R) to restore the SD card.
(A P42 [Restoring the SD Card] )
Memo :
This item appears only when the SD card needs
0
to be restored. However, it is not selectable
when recording in Camera mode and during Clip
Review.
Setup File
This allows you to save the menu settings as well
as the performance results of shutter speed and
AWB.
It is useful to save settings according to different
shooting conditions.
9 Load File...
Loads the settings.
(A P132 [Loading a Setup File] )
9 Store File...
Saves the settings.
(A P131 [Saving Setup Files] )
9 Delete File...
Deletes the configured file.
(A P133 [Deleting Setup Files] )
110
Auto Power Off
For setting whether to turn off the power
automatically when the camera recorder is not
operated for more than 5 minutes when the battery
is used. This function is valid only when the battery
is used.
[Setting Values: On, ROff]
Memo :
When both the battery and AC adapter are
0
connected, power from the AC adapter
connection will be used. As such, this function
will not have any effect.
Tally Lamp
For specifying the illumination settings of the tally
lamp during recording.
On:
0
Lights up only during recording.
Off:
0
Turns off the indicator.
[Setting Values: ROn, Off]
GPS
For setting the GPS function to On or Off (power
on/off).
[Setting Values: On, ROff]
Network
To use the network function, set this item to
"On(SDI Off)" or "On(HDMI Off)".
On(SDI Off):
0
Uses the network function. However, SDI output
is disabled.
On(HDMI Off):
0
Uses the network function. However, HDMI
output is disabled.
Off:
0
Does not use the network function.
[Setting Values: On(SDI Off), On(HDMI Off), ROff]
Memo :
Restriction applies to the following functions
0
when you are using the network function.
SDI and HDMI cannot be output
0
simultaneously.
[Variable Frame Rate] cannot be selected.
0
[Flash Band Correction] is fixed at "Off".
0
[LCD + VF] is fixed at "Off".
0