JVC GY-HM650U Instructions Manual page 124

U Date/Time Display
Displays the current date and time.
Memo :
The date/time display style can be specified in
0
[Main Menu] B [LCD/VF] B [Display Settings]
B [Date Style]/[Time Style].
(A P106 [ Date Style ] )
(A P106 [ Time Style ] )
This item is not displayed when [Main Menu] B
0
[LCD/VF] B [Display Settings] B [Date/Time] is
set to "Off".
(A P106 [ Date/Time ] )
When [Main Menu] B [System] B [Record
0
Set] B [Time Stamp] is set to "On", this item is
not displayed.
(A P115 [ Time Stamp ] )
V Zoom Display
Displays the zoom position. (Zoom bar or
0
value)
The zoom bar will only be displayed for 3
0
seconds after the zoom operation is
activated.
The value will always be displayed. (0 to 99)
0
Memo :
You can specify the display method (Number/
0
Bar) and whether to turn off the display in [LCD/
VF] B [Display Settings] B "Zoom".
This item will not be displayed when "Off" is
selected.
(A P105 [ Zoom ] )
Displayed in the Display 0 screen only when
0
there is a change.
W Network Connection Icon
When [Main Menu] B [System] B [Network]
0
is set to "On", the network connection status
is displayed.
This icon is not displayed when "Off" is
selected.
Icon
Connection is not established
(starting up, preparing for
connection)
(Blink)
Connection is not established
(preparing for connection)
(Yellow)
Connection is established
When a USB adapter different
from the connection settings is
detected
(No display) When an incompatible USB
adapter is detected, or when
[Network] is set to "Off"
124
Status
X Time Code (I)/User's Bit (J) Display
Displays the time code (hour: minute:
0
second: frame) or user's bit data.
Example of time code display:
0
0 0 : 0 0 : 0 0 : 0 0
※
* Colon (:) denotes non-drop frames and dot (.)
denotes drop frames.
Example of user's bit display:
0
F F E E D D 2 0
Memo :
You can specify whether to display the time
0
code, user's bit, or turn off the display in
[LCD/VF] B [Display Settings] B [TC/UB].
This item will not be displayed when "Off" is
selected.
(A P106 [ TC/UB ] )
Y Time Code Lock Indicator
When the built-in time code generator is
synchronized to the external time code data
input during the synchronization of time code
with another camera recorder, Z lights up.
(A P68 [Synchronizing Time Code on Another
Camera] )
Z Event/Warning Display Area
Displays error messages.
(A P159 [Error Messages and Actions] )