List Of Ftp Transfer Errors - JVC GY-HM650U Instructions Manual

List of FTP Transfer Errors

If the upload of a recorded clip or download of the metadata setup file (XML format) is not successfully
completed, the following errors are displayed.
Error message
Timeout.
Media Was Removed.
Adapter Was Removed.
Cannot Connect to Server.
Access Denied.
Invalid Username or
Password.
Invalid Path Was Requested. The path specified for the FTP
Server Error.
Invalid Request.
Invalid Data Size.
Invalid Data Format.
Status
Transfer was discontinued due to
timeout caused by network
transmission or server failure.
SD card is removed while FTP
transfer is in progress.
The USB network device is
removed while FTP transfer is in
progress.
Unable to connect to the FTP server. Adjust the Server and Port settings
Access is denied.
Authentication for login to the FTP
server failed.
server is incorrect.
There was an unintended operation
of the FTP server.
A bad request is executed for the
FTP server.
Invalid data size, such as a planning
metadata size that exceeds 4 KB.
The XML format of the planning
metadata is invalid.
Action
Execute again.
0
Use a different server.
0
Insert the SD card and execute FTP
transfer again.
Connect the USB network device.
for [Metadata Server] or [Clip
Server].
(A P116 [ Metadata Server ] )
(A P116 [ Clip Server ] )
Adjust the Server and Port settings
for [Metadata Server] or [Clip
Server].
(A P116 [ Metadata Server ] )
(A P116 [ Clip Server ] )
Adjust the Username and Password
settings for [Metadata Server] or
[Clip Server].
(A P116 [ Metadata Server ] )
(A P116 [ Clip Server ] )
Adjust the [Clip Server] and [Dir.
Path] settings for [Metadata
Server] or [File Path].
(A P116 [ Metadata Server ] )
(A P116 [ Clip Server ] )
Execute again.
Use a different server.
Execute again.
Adjust the planning metadata saved
in the [Metadata Server].
(A P147 [ Planning Metadata ] )
Adjust the planning metadata saved
in the [Metadata Server].
(A P147 [ Planning Metadata ] )
161