PRIMARY AND SECONDARY SHEAVES
ASSEMBLING THE PRIMARY SHEAVE
1. Clean:
• primary sliding sheave face 1
• primary fixed sheave face 2
• collar 3
• weights 4
• primary sliding sheave cam face
NOTE:
Remove any excess grease.
2. Install:
• weights 1
NOTE:
• Apply Yamaha Grizzly grease (90 g) to the
whole outer surface of the weights and
install.
• Apply Yamaha Grizzly grease to the inner
surface of the collar.
• Apply Yamaha Grizzly grease to the inner
surface of the primary sliding sheave.
3. Install:
• spacer
• sliders 1
• primary pulley cam 2
• primary sliding sheave cap
ASSEMBLING THE SECONDARY SHEAVE
1. Apply:
• BEL-RAY assembly lube
(to the secondary sliding sheave 1 inner
surface and oil seals)
• BEL-RAY assembly lube
(to the bearings, oil seals and inner surface
of the secondary fixed sheave 2)
2. Install:
• guide pins 1
4 - 58
ENG
3 Nm (0.3 m · kg, 2.2 ft · lb)
®
®