Adjusting The Select Lever Shift Rod; Adjusting The Brake Light Switch - Yamaha 2004 Rhino 660 YXR660FAS Service Manual

ADJUSTING THE SELECT LEVER SHIFT ROD/

ADJUSTING THE BRAKE LIGHT SWITCH

ADJUSTING THE SELECT LEVER SHIFT
ROD
1 Neutral
2 High
3 Low
4 Reverse
5 Select lever shift rod
CAUTION:
Before shifting, you must stop the vehicle
and take your foot off the accelerator pedal.
Otherwise, the transmission may be dam-
aged.
1. Adjust:
• Select lever shift rod
M MMM M MMM M M MMM M
a. Make sure the select lever is in NEUTRAL.
b. Loosen both locknuts 1.
CAUTION:
The select lever shift rod locknut (select
lever side) has left-handed threads. To
loosen the locknut, turn it clockwise.
c. Adjust the shift rod length for smooth and
correct shifting.
d. Tighten the locknuts 1.
Locknut
15 Nm (1.5 m · kg, 11 ft · lb)
L LLL L LLL L L LLL L
ADJUSTING THE BRAKE LIGHT SWITCH
NOTE:
• The brake light switch is operated by move-
ment of the brake pedal.
• The brake light switch is properly adjusted
when the brake light comes on just before
the braking effect starts.
3 - 32
CHK
ADJ
M MMM M M MMM M M MMM M MMM
L LLL L L LLL L L LLL L LLL