Installing The Clutch - Yamaha 2004 Rhino 660 YXR660FAS Service Manual

CLUTCH
b. When turning the clutch housing clockwise
È, the clutch housing should turn freely.
If not, the one-way clutch assembly is
faulty.
Replace it.
c. When turning the clutch housing counter-
clockwise É, the clutch housing and crank-
shaft should be engaged.
If not, the one-way clutch assembly is
faulty.
Replace it.
L LLL L LLL L L LLL L
2. Check:
• clutch shoe
Heat damage → Replace.
3. Measure:
• clutch shoe thickness
Out of specification → Replace.
Clutch shoe thickness
1.5 mm (0.06 in)
Clutch shoe wear limit a
1.0 mm (0.04 in)

INSTALLING THE CLUTCH

1. Install:
• clutch carrier assembly
• nut 1
New
NOTE:
Use a universal clutch holder 2 to hold the
clutch carrier assembly.
Universal clutch holder
P/N. YM-91042, 90890-04086
2. Lock the threads with a drift punch.
4 - 64
ENG
L LLL L L LLL L L LLL L LLL
160 Nm (16.0 m · kg, 115 ft · lb)