Craftsman 108.27807 Operator's Manual page 40

neutral. Press the engine start button. NEVER press the engine start button for
more than 5 seconds at a time or you can flood the engine.
4. If the engine does not start, turn the key switch off, wait 15 seconds and repeat
steps 3 and 4 two more times.
5. If after step 4 the engine still does not start , press and release the throttle lever
¼ of its full travel 3 times to prime the carburetor before attempting to start the
engine again.
CAUTION:
NEVER press the throttle more than ¼ of its full travel during
the starting procedure. Doing so will flood the engine and cause fouling of the
spark plug.
Cold Weather Starting
Perform starting procedure steps 1 through 5.
NOTE: While pressing the engine start button it may be necessary to hold the
throttle lever not more than ¼ of the full travel to accommodate the auto-choking
system in a cold weather.
REMEMBER:
• Always double-check that the engine stop switch is in the RUN position.
• Turn the fuel valve selector to OFF when ATV is not in use or is being
transported.
• Never press the engine start button for more than five seconds at a time or you
can flood the engine.
0
(less than 40 F)
40