Daily Pre-Ride Inspection - Craftsman 108.27807 Operator's Manual

5. Daily Pre-Ride Inspection

WARNING
You must inspect your ATV each time before riding to ensure it is in proper working
order. If proper inspection is not done, severe injury or death could result.
Use the following checklist to verify your machine is in proper working order each
time you ride.
Item/Inspection Procedure
1. Tires: check condition and pressures.
2. Fuel tank: fill the fuel tank to its proper level.
3. All brakes: check operation, adjustment and fluid level (includes auxiliary
brake).
4. Throttle: check for free operation and closing.
5. Headlight / Tail light / Brake light: check operation of all indicator lights and
switches.
6. Engine stop switch: check for proper function.
7. Wheels: check for tightness of wheel nuts and axle nuts; check that axle nuts
are secured by cotter pins.
8. Air cleaner element: check for dirt; clean or replace.
9. Steering: check for free operation noting any unusual looseness in any area.
10. Loose parts: visually inspect vehicle for any damaged components or loose
nuts/bolts or fasteners.
11. Operator: wear proper riding gear; helmets, goggles and clothing.
12. Engine coolant: check for proper level at the recovery bottle.
13. 4WD Units Only: pull the handlebar to one side or ride the ATV at a low speed.
Steering should remain balanced from left to right in 2WD and 4WD positions.
16