Fitting And Replacing The Charcoal Filter; Resetting The Operating Hours Counter For The Charcoal Filter - Miele DA 6290 W Operating And Installation Instructions

Fitting and replacing the
charcoal filter
If the rangehood is connected for
recirculation, a charcoal filter must be
inserted in addition to the grease filters.
This is designed to absorb cooking
odours and is fitted in the canopy
above the grease filter.
Replacement charcoal filters can be
obtained from your Chartered Agent,
Miele or via the internet at
www.miele-shop.com (depending on
country).
See back cover for contact details,
and "Technical data" for type and
reference number.
^ Before fitting or replacing the
charcoal filter, the grease filters must
first be taken out (see previous
section for instructions on how to do
this).
^ Unwrap the charcoal filter from its
packaging.
^ Insert the charcoal filter into the back
of the charcoal filter frame, then push
up into the frame at the front.
^ Replace the grease filters.
When fitting for the first time:
Cleaning and care
^ Activate the operating hours counter
(see "Operation").
Always replace the charcoal filter im-
mediately if
– the charcoal filter symbol — lights
up,
or
– it is no longer effective in absorbing
kitchen odours.
It should, however, be replaced at least
every 6 months.
Used charcoal filters can be disposed
of with the normal household waste.
Resetting the operating hours
counter for the charcoal filter
After cleaning, the operating hours
counter needs to be reset.
^ Whilst the fan is switched on, press
the operating hours control l—
twice and hold for approx. 3
seconds until only the 1 is flashing.
The charcoal filter symbol — will go
out.
If the charcoal filter is replaced before
the operating hours counter has
reached its maximum,
^ press the operating hours control
l— twice and hold for approx. 6
seconds until only the 1 is flashing.
23