Table of Contents
Advertisement
^ Glass surfaces can be cleaned using
a proprietary non-abrasive cleaning
agent designed specifically for use
on glass.
– Avoid oven sprays.
^ The glass canopy can be tilted
forwards in order to clean it at the
back. Pull the lower edge forwards
until it is vertical.
If you cannot pull the glass canopy
forwards, it is possible that the
transport locking devices have not
been loosened. Follow the fitting
instructions.
^ After cleaning, tilt the glass canopy
back into position carefully. You will
feel a slight resistance when doing
so.
If the cooker hood is connected for
recirculation, a charcoal filter must be
inserted in addition to the grease filter.
This is designed to absorb cooking
odours.
It is fitted in the canopy above the
grease filter.
New filters can be purchased from
your Miele dealer or from the Miele
Spare Parts Department.
See back cover for contact details,
and "Technical data" for the model
number of the filter.
^ Before fitting or replacing the
charcoal filter, the vapour plates and
the grease filter must first be taken
out. See previous section for
instructions on how to do this.
^ Take the charcoal filter out of its
packaging.
^ Slide it in above the guides for the
grease filter.
^ Replace the grease filter and vapour
plates.
23
Advertisement
Table of Contents
