Operating Hours Counter L&#X97 - Miele DA 6290 W Operating And Installation Instructions

Operation

Operating hours counter l—

The number of hours the appliance has
been in operation is stored in memory.
When the grease filter symbol l or the
charcoal filter symbol — lights up, the
operating hours counters are signalling
that the filters need to be cleaned or
changed.
Further information about cleaning and
changing the filters and resetting the
operating hours counter can be found
under "Cleaning and care".
Altering the operating hours counter
for the grease filters l
You can set the operating hours
counter for the grease filters to suit the
type of cooking you do.
– Select a short time if you roast or fry
frequently.
– If you use very little fat for cooking,
select a longer time.
– If you only cook occasionally, we
recommend that you still select a
short time because grease which has
built up gradually over a long period
of time will harden on the grease
filters and make cleaning more
difficult.
The grease filter operating hours
counter is set at the factory for 30
hours. This can be lengthened or
shortened to suit the type of cooking
you do. You can choose 20, 30, 40 or
50 hours.
^ Press the On/Off sensor s to switch
the fan off.
18
^ Press the run-on control 5 ¢15 and
the operating hours control l— at
the same time.
The grease filter symbol l of the
operating hours control and one of the
fan levels will flash.
The 1 to IS sensors indicate the time
set:
1 = 20 hours
2 = 30 hours
3 = 40 hours
IS = 50 hours
^ Press the – symbol to select a shorter
operating time, or the + symbol to
select a longer operating time.
^ Confirm the selection by pressing the
operating hours control l—.
All the lamps will go out.
If you do not confirm your selection
within 4 minutes, the rangehood will
automatically revert to the original
setting.