Changing Settings; Altering The Grease Filter Operating Hours Counter - Miele DAS 4630 Operating And Installation Instructions

Altering the grease filter
operating hours counter
You can set the operating hours counter
to suit the type of cooking you do.
The factory setting is a cleaning interval
of 30 hours.
- Select a shorter time of 20 hours if
you fry a lot.
- If you only cook occasionally, we
recommend that you still select a
short time for the counter. This is to
prevent grease from hardening on the
filter and making cleaning more
difficult.
- Select a longer time of 40 or 50 hours
if you use very little fat for cooking.

Changing settings

 Touch the On/Off sensor .
All symbols light up with reduced
brightness.
 Press and hold the run-on option
control  until the grease filter 
and charcoal filter  symbols light
up.
 Touch the grease filter symbol .
The grease filter symbol  and one of
the fan power level indicators will flash.
The fan power level indicators 1 to B
show the time set:
1............................................... 20 hours
2............................................... 30 hours
3............................................... 40 hours
B .............................................. 50 hours
 Touch the relevant control to select
the duration required.
 Confirm your choice by touching the
grease filter control . If you do not
confirm your selection within
4 minutes, the rangehood will
automatically revert to the previous
setting.
29