Adjusting The Brightness - JVC GY-HM600U Instructions Manual

Selecting Specific Person from Several
Persons
1 Hold down the user button that is assigned
with "Face Detect".
The camera recorder will enter face
0
selection mode and the face detection icon
(q) will blink.
An orange frame will appear on the face of
0
the person nearest to the center of the
screen. Blue frames will appear on the faces
of others.
Detection Frame (Orange)
Detection Frame (Blue)
.
2 Select a specific person.
Use the cross-shaped button (HIJK) to
0
select a person.
An orange frame will appear on the face of
0
the selected person and focus will be
automatically adjusted.
Detection Frame (Orange)
Detection Frame (Blue)
.
3 Press the Set button (R) to confirm the
person for face detection.
Memo :
Press the [CANCEL] button to cancel the
0
selection.
You can specify the detection sensitivity and the
0
operation speed after losing sight of the face
using [Main Menu] B [Camera Function] B
[User Switch Set] B [Face Detect] B [Sensitivity]
and [Hysteresis].
(A P97 [ Sensitivity ] )
(A P97 [ Hysteresis ] )

Adjusting the Brightness

Adjust the brightness using Iris, Gain, Shutter
speed and ND filter according to the brightness of
the object.
Adjusting the Brightness Automatically
When the [FULL AUTO] switch is set to "ON", Iris,
Gain, Shutter speed and ND filter are automatically
adjusted according to the brightness of the object
to maintain optimum brightness.
Blinking
MENU/THUMB
CANCEL
GAIN
.
Memo :
You can use the cross-shaped button (HI) on
0
the side of the camera recorder to set the target
level (brighter/darker) to maintain optimum
brightness during automatic adjustment.
(A P94 [ AE Level ] )
The convergence speed of the automatic
0
adjustment for gain, shutter and iris can be set
in the menu.
(A P94 [ AE Speed ] )
If one or more of the items (Gain, Iris and
0
Shutter) have been set to "Auto", the value of the
corresponding items when the user button that
is assigned "AE Lock" is pressed can be fixed.
(A P97 [ AE Lock ] )
Adjusting the Brightness Manually
When the [FULL AUTO] switch is set to "OFF",
some or all of the items (Iris, Gain and Shutter
Speed) can be manually adjusted.
(A P52 [Adjusting the Iris] )
(A P53 [Setting the Gain] )
(A P54 [Setting the Electronic Shutter] )
Memo :
If Iris, Gain and Shutter Speed are manually
0
adjusted, the [AE Level] setting is temporarily
disabled.
AE LOCK/4
AE LEVEL
FULL AUTO
WHT BAL SHUTTER
ON
OFF
51