JVC GY-HM600U Instructions Manual page 17

Operation Mode
Camera Mode This is the camera shooting mode. The camera recorder starts up in Camera mode
0
when the power is turned on.
Camera images are output on the viewfinder and LCD monitor. When a recordable
0
SD card is inserted, the camera recorder enters the recording standby mode.
"STBY" appears on the operation mode display area of the LCD monitor and
viewfinder.
Press the [REC] trigger button to start recording.
0
Memo :
Playback of SD card is not possible in Camera mode. However, you can check the
0
most recently recorded video clip.
(A P72 [Viewing Recorded Videos Immediately (Clip Review)] )
Media Mode This mode allows you to play back or delete clips recorded on the SD card.
0
When a playable SD card is inserted, the thumbnail or playback screen is displayed
0
on the viewfinder and LCD monitor.
Press the [MODE] selection button to enter Media mode when you are not shooting
0
in Camera mode. Once the camera recorder is in Media mode, thumbnails of the
selected media slot are displayed.
USB Mode This mode allows you to connect to a PC and transfer the files on an SD card to
0
the PC.
When the camera recorder is connected to a USB cable, the message "Change to
0
USB Mode?" appears.
Select [Change] and press the Set button to switch to USB mode.
(A P132 [Managing/Editing Clips on a PC] )
In USB mode, the camera recorder is recognized by the connected PC as a
0
peripheral drive. (USB mass storage class only)
Disable the connection on the PC and remove the USB cable from the camera
recorder to switch to Camera mode.
(A P132 [Managing/Editing Clips on a PC] )
Memo :
When a USB cable is connected during recording, the message appears after
0
recording stops.
If playback is in progress, the message appears once the files are closed
0
automatically, such as when playback stops.
Files on the PC cannot be written to the SD card.
0
Description
17