Blinking Of The Tally Lamp; Warning Tone - JVC GY-HM600U Instructions Manual

Error Message
Record Format Incorrect
Media Full
No Clips
No Media
No Media
No Clips
12h Continuation Record

Blinking of the Tally Lamp

The tally lamp start blinking when the remaining space on the SD card is running out during recording, or
when the battery power is running low.
Blinking Mode
Blinks slowly
(once every second)
Blinks quickly
(2 times per second)

Warning Tone

Warning tone is output from the monitor speaker and [x] terminal when the battery level is low.
0
Warning tone is also output when an error occurs in the camera recorder.
0
Memo :
You can specify whether to turn on the warning tone as well as setting the volume in [A/V Set] B [Audio
0
Set] B [Alarm Level].
(A P110 [ Alarm Level ] )
Status
Video format of the file for Clip
0
Review is different from the
[Frame & Bit Rate] setting of the
camera recorder.
[REC] button is pressed when
0
the media in use has no
remaining space.
Remaining space ran out during
0
recording.
No viewable clips are found on the
card for Clip Review.
[REC] button is pressed when an SD
card is not inserted.
No SD card is found in Media mode
or when the thumbnail screen is
displayed.
No clips are found on the inserted
SD card in Media mode or when the
thumbnail screen is displayed.
The continuous recording time in
AVCHD mode exceeds 12 hours
and recording stops automatically.
Remaining Battery Power/SD Card Space
Battery power is low
0
Remaining recording time on SD card is less than 3 minutes (during
0
recording)
When a malfunction occurred during live streaming
0
Remaining battery power is almost zero
0
Remaining recording time on SD card is zero (during recording)
0
Error on the camera recorder
0
Action
Set [Resolution] and [Frame & Bit
Rate] correctly.
(A P112 [ Resolution ] )
(A P112 [ Frame & Bit Rate ] )
Replace the SD card with a new
one.
Insert an SD card that contains clips
that can be reviewed.
(A P37 [SD Card] )
(A P72 [Viewing Recorded
Videos Immediately (Clip
Review)] )
Insert an SD card.
(A P37 [SD Card] )
Insert an SD card.
(A P37 [SD Card] )
Insert an SD card that contains
playable clips.
(A P37 [SD Card] )
(A P82 [Playing Recorded
Clips] )
To continue recording, press the
[REC] button again.
137