JVC GY-HM600U Instructions Manual page 122

R Focus Assist
"FOCUS" is displayed when auto focus is
0
activated.
When ACCU-Focus is enabled, "ACCU-
0
FOCUS" blinks for about 10 seconds while
Focus Assist starts up, after which the
"FOCUS" indicator lights up.
If recording starts while [ACCU-Focus] is
0
active, [ACCU-Focus] will be forcibly
deactivated.
(A P104 [ Focus Assist ] )
Memo :
Displayed in the Display 0 screen only when
0
there is a change.
S Luminance Information
Displayed when the Spot Meter function is
activated.
(A P70 [Setting Spot Meter] )
MAX : Maximum luminance
MIN : Minimum luminance
T Date/Time Display
Displays the current date and time.
Memo :
The date/time display style can be specified in
0
[Main Menu] B [LCD/VF] B [Display Settings] B
[Date Style]/[Time Style].
(A P107 [ Date Style ] )
(A P107 [ Time Style ] )
This item is not displayed when [Main Menu] B
0
[LCD/VF] B [Display Settings] B [Date/Time] is
set to "Off".
(A P107 [ Date/Time ] )
When [Main Menu] B [System] B [Record Set]
0
B [Time Stamp] is set to "On", this item is not
displayed.
(A P114 [ Time Stamp ] )
U Zoom Display
Displays the zoom position. (Zoom bar or
0
value)
The zoom bar will only be displayed for 3
0
seconds after the zoom operation is
activated.
The value will always be displayed. (0 to 99)
0
122
Memo :
You can specify the display method (Number/
0
Bar) and whether to turn off the display in [LCD/
VF] B [Display Settings] B "Zoom".
This item will not be displayed when "Off" is
selected.
(A P106 [ Zoom ] )
Displayed in the Display 0 screen only when
0
there is a change.
V Time Code (I)/User's Bit (J) Display
Displays the time code (hour: minute:
0
second: frame) or user's bit data.
Example of time code display:
0
0 0 : 0 0 : 0 0 : 0 0
※
.
* Colon (:) denotes non-drop frames and dot (.)
denotes drop frames.
Example of user's bit display:
0
F F E E DD 2 0
.