Setup Flow For Topaccess - Toshiba e-STUDIO352 Quick Start Manual

5 SETUP FLOW

SETUP FLOW FOR TopAccess

Users and an administrator can remotely manage the equipment using TopAccess, web-based
utility.
Once TopAccess is enabled, users can view the device information, and manage their jobs
remotely from the computer using the web browser. Also TopAccess allows users to register the
address book and templates using TopAccess.
Using an administrator's functions of TopAccess, an administrator can set up and maintain the
equipment remotely.
To enable TopAccess, an administrator should set up the network connection between comput-
ers and this equipment over TCP/IP, and enable the HTTP network service.
Setup Flow
Connect this equipment
Set up the TCP/IP (IPv4)
Set up the IPv6
Set up the HTTP Network
Service
40

SETUP FLOW FOR TopAccess

Description/Reference
Connect the machine to your network with a network cable.
Reference: QUICK START GUIDE
Chapter 4 "CONNECTING TO THE DEVICE"
"2. CONNECTING TO THE NETWORK"
Assign the IP address, Subnet mask, Gateway address.
Reference: USER FUNCTIONS GUIDE
Chapter 4 "SETTING ITEMS (ADMIN)"
"3. SETTING NETWORK FUNCTIONS"
"Setting the TCP/IP Protocol (IPv4)"
Reference: TopAccess Guide
Chapter 7 "TOPACCESS ADMINISTRATOR MODE"
"Setting up from TopAccess"
"Setting up Network Settings"
"Setting up the TCP/IP"
Assign the IP address, prefix, Gateway address.
Reference: USER FUNCTIONS GUIDE
Chapter 4 "SETTING ITEMS (ADMIN)"
"3. SETTING NETWORK FUNCTIONS"
"Setting the TCP/IP Protocol (IPv6)"
Reference: TopAccess Guide
Chapter 7 "TOPACCESS ADMINISTRATOR MODE"
"Setting up from TopAccess"
"Setting up Network Settings"
"Setting up the IPv6"
Enable the HTTP Network Server.
Reference: USER FUNCTIONS GUIDE
Chapter 4 "SETTING ITEMS (ADMIN)"
"3. SETTING NETWORK FUNCTIONS"
"Setting the HTTP Network Service"