Setup Flow For Topaccess - Toshiba ESTUDIO355 Quick Start Manual

4. SETUP FLOW FOR TopAccess

Users and an administrator can remotely manage the equipment using TopAccess, web-based utility.
Once TopAccess is enabled, users can view the device information, and manage their jobs remotely from
the computer using the web browser. Also TopAccess allows users to register the address book and tem-
plates using TopAccess.
Using an administrator's functions of TopAccess, an administrator can set up and maintain the equipment
remotely.
To enable TopAccess, an administrator should set up the network connection between computers and this
equipment over TCP/IP, and enable the HTTP network service.
Setup Flow
Connect this equip-
ment
Set up the TCP/IP
(IPv4)
Set up the IPv6
Set up the HTTP Net-
work Service
Connect the machine to your network with a network cable.
Reference: QUICK START GUIDE
• Chapter 4 "CONNECTING TO THE DEVICE"
"2. CONNECTING TO THE NETWORK"
Assign the IP address, Subnet mask, Gateway address.
Reference: USER FUNCTIONS GUIDE
• Chapter 4 "SETTING ITEMS (ADMIN)"
"3. SETTING NETWORK FUNCTIONS"
"Setting the TCP/IP Protocol (IPv4)"
Reference: TopAccess Guide
• Chapter 7 "TOPACCESS ADMINISTRATOR MODE"
"Setting up from TopAccess"
"Setting up Network Settings"
"Setting up the TCP/IP"
Assign the IP address, Prefix, Gateway address.
Reference: USER FUNCTIONS GUIDE
• Chapter 4 "SETTING ITEMS (ADMIN)"
"3. SETTING NETWORK FUNCTIONS"
"Setting the IPv6 Protocol"
Reference: TopAccess Guide
• Chapter 7 "TOPACCESS ADMINISTRATOR MODE"
"Setting up from TopAccess"
"Setting up Network Settings"
"Setting up the IPv6"
Enable the HTTP Network Server.
Reference: USER FUNCTIONS GUIDE
• Chapter 4 "SETTING ITEMS (ADMIN)"
"3. SETTING NETWORK FUNCTIONS"
"Setting the HTTP Network Service"
Description/Reference
5
35