Toshiba e-STUDIO352 Quick Start Manual page 66

5 SETUP FLOW
Setup Flow for IPP Printing
This equipment can be used with the IPP printer connection for UNIX workstation in a TCP/IP
network using CUPS. Even though IPP printing can be used in a local area network, this method
is commonly used to print over the Internet. If you allow IPP printing through the Internet, you
must configure the DNS server to enable users to access this equipment over the Internet using
the HTTP protocol. This is useful when users want to print to this equipment from outside the
local area network.
Setup Flow
Connect this equipment
Set up the TCP/IP (IPv4)
Set up the IPv6
64 SETUP FLOW FOR PRINTING FEATURES
Connecting over Internet
Setting up the IPP
printer connection
using CUPS
Description/Reference
Connect the machine to your network with a network cable.
Reference: QUICK START GUIDE
Chapter 4 "CONNECTING TO THE DEVICE"
"2. CONNECTING TO THE NETWORK"
Assign the IP address, Subnet mask, Gateway address.
Reference: USER FUNCTIONS GUIDE
Chapter 4 "SETTING ITEMS (ADMIN)"
"3. SETTING NETWORK FUNCTIONS"
"Setting the TCP/IP Protocol (IPv4)"
Reference: TopAccess Guide
Chapter 7 "TOPACCESS ADMINISTRATOR MODE"
"Setting up from TopAccess"
"Setting up Network Settings"
"Setting up the TCP/IP"
Assign the IP address, prefix, Gateway address.
Reference: USER FUNCTIONS GUIDE
Chapter 4 "SETTING ITEMS (ADMIN)"
"3. SETTING NETWORK FUNCTIONS"
"Setting the TCP/IP Protocol (IPv6)"
Reference: TopAccess Guide
Chapter 7 "TOPACCESS ADMINISTRATOR MODE"
"Setting up from TopAccess"
"Setting up Network Settings"
"Setting up the IPv6"
Unix workstation