Toshiba e-STUDIO352 Quick Start Manual page 72

5 SETUP FLOW
Setup Flow
Set up the IPv6
Set up the FTP Network
Service
Set up the Destination
Set up the Remote 1 and
Remote 2
70 SETUP FLOW FOR SCANNING FEATURES
Description/Reference
Assign the IP address, prefix, Gateway address.
Reference: USER FUNCTIONS GUIDE
Chapter 4 "SETTING ITEMS (ADMIN)"
"3. SETTING NETWORK FUNCTIONS"
"Setting the TCP/IP Protocol (IPv6)"
Reference: TopAccess Guide
Chapter 7 "TOPACCESS ADMINISTRATOR MODE"
"Setting up from TopAccess"
"Setting up Network Settings"
"Setting up the IPv6"
Enable the FTP Client using TopAccess.
Reference: TopAccess Guide
Chapter 7 "TOPACCESS ADMINISTRATOR MODE"
"Setting up from TopAccess"
"Setting up Network Settings"
"Setting up the FTP Client"
An administrator should configure the network folder will be enabled or dis-
abled for Scan to File destination using TopAccess.
Reference: TopAccess Guide
Chapter 7 "TOPACCESS ADMINISTRATOR MODE"
"Setting up from TopAccess"
"Setting up Save as file Settings"
"Setting up the Destination"
If the network folder is enabled for the Scan to File destination, an adminis-
trator should specify the network folders to save the scanned file, or allows
users to specify the network folder using TopAccess.
Reference: TopAccess Guide
Chapter 7 "TOPACCESS ADMINISTRATOR MODE"
"Setting up from TopAccess"
"Setting up Save as file Settings"
"Setting up the Remote 1 and Remote 2"