Replacing The Battery - Nokia 105s Installation Manual

6
Installing and Replacing Other Components

Replacing the Battery

To replace the battery, you need the following:
The appropriate Nokia battery replacement kit for your gateway
Physical access to the gateway
A Phillips-head screwdriver
A grounding wrist strap
(Optional) Safety glasses
Warning
An explosion might occur if the battery is incorrectly placed. Replace the
battery only with the same or equivalent type that the manufacturer
recommends. Dispose of used batteries according to the manufacturer's
instructions.
Warning
Make certain to remove the power cord from the gateway before you
proceed with any of the following steps. Failure to do so could cause
electric shock with burns or death resulting for the user.
Caution
Make certain that you are properly grounded when you handle
components internal to the gateway to protect against electrostatic
discharge damage to the gateway. Use the grounding strap included
in the battery replacement kit.
To install the battery
1. Use Network Voyager or the CLI to halt the gateway.
To use Network Voyager to shut the gateway down, select
System > Configuration > Reboot or Shutdown > Halt.
82 Nokia 105s Gateway Installation Guide