Two-Port Fiber-Optic Gigabit Ethernet Network Interface Card; Fiber-Optic Gigabit Ethernet Nic Features - Nokia 105s Installation Manual

5
Connecting PMC Network Interface Cards
To connect the 105s gateway to other network components, you can order
appropriate adapter cables separately from a cable vendor of your choice.
Two-Port Fiber-Optic Gigabit Ethernet Network
Interface Card
All NICs installed in a 105s are installed into slots on the gateway. Gigabit
Ethernet NICs can occupy any of the slots or subslots in a gateway that other
NICs do not occupy.

Fiber-Optic Gigabit Ethernet NIC Features

The two-port fiber-optic Gigabit Ethernet NIC provides the following
features:
Supports traffic at 1000 Mbps
High bandwidth
Full-duplex mode operation up to 1 Gbps (no half-duplex support)
Link speed auto advertising
Packet tracing for analysis through tcpdump
Compliance with IEEE 802.3z Gigabit Ethernet specification
You can configure and monitor Ethernet interfaces with Nokia Network
Voyager, the Web-based element management interface to Nokia gateways.
Specifically, you set the port speed and full-duplex mode with Network
Voyager.
Figure 16
Ethernet NIC you use in the 105s gateway.
66
shows the front panel details for the two-port fiber-optic Gigabit
Nokia 105s Gateway Installation Guide