Nokia 105s Installation Manual page 33

To connect to the console with a null-modem cable
1. Connect the supplied null-modem console cable to the console port on the
2. Connect the other end of the cable to the VT100 console or to a system
The cable that Nokia provides with 105s gateways includes a latching
mechanism used to secure the cable to the console port or auxiliary port of
your gateway.
Nokia 105s Gateway Installation Guide
9600 bps
8 data bits
No parity
1 stop bit
front panel of the 105s.
Note
The supplied console cable is Cisco compatible.
Use only the RJ-45 port labeled Console on the front panel; the serial
(AUX) port is an auxiliary modem port.
One RJ-45 termination has a retractable shroud that releases or secures
the RJ-45 tab. Use this end of the cable when connecting to the console
port of the 105s.
For cable pin assignments for the console connection, see
on page 35.
running a terminal-emulation program.
Connecting to the Console or Auxiliary Port
Console port
00525gen
"Console Port"
33