Sanyo ASW U1100T Service Manual page 9

DRY CARE Course:
Turn on the power switch (ON/ OFF).
Load the laundry into the washer.
Press ONE TOUCH SELECT to select the Dry Care course.
Press the START/ PAUSE button.
WATER IS SUPPLIED
WASH
RINSE
WATER IS SUPPLIED
SPIN
The safety device activation and load automatically adjusting program:
During Spin-Dry cycle in Rinse process or Spin process, if the safety device works, the washer will
automatically stop Spin-Dry cycle and adjust the balance of wash load.
Drain
Spin Safety device works.
Is the washer lid open ?
Has the Safety Device been
activated three times ?
Trouble in Spin-Dry cycle.
WASH
DRAIN
SPIN
RINSE
DRAIN
SPIN
Yes
Yes
No
No
Water is supplied to MED level.
Depending on the volume of laundry, for best results,
use LOW2, HIGH water level.
Pulsator will rotate and select the suitable water flow
responding to DRY CARE course.
After water level reaches reset point, draining course
continues for 1 40
Water is supplied to the selected water level.
Intermittent spin cycle:1 10 ON.
Continuous spin cycle: 50 ON.
During spinning if unbalance condition occurs, safety
switch will activate.
Water is supplied to MED level.
Overflow rinse: Twice overflow.
After water level reaches reset point, draining
continues 1 40 .
Intermittent spin cycle: 1 10 ON.
Continuous spin cycle: 50 ON.
During spinning if unbalance condition occurs, safety
switch will activate.
Close the Washer Lid, the
washer will operate continuously.
Adjust the clothes evenly:
Yes
Water is supplied to set water
level. Implementing water save
rinse.
- 8 -