Method Of Operation - Sanyo ASW U1100T Service Manual

5. Method of operation

Name and function of buttons on control panel:
When you press those buttons, the setting program and indicators (LED) will change alternately.
BUTTON SETTING PROGRAM
To turn the power ON and
POWER
OFF alternately.
SWITCH
Start or temporarily stop
START/PAUSE
wash operation.
Choose the desired washing
ONE TOUCH
program : Normal, Heavy
SELECT
Duty, Custom, Blanket, Dry
Care.
Used to set a variety of
wash programs.
SELECT/ SET
To preset the finish time,
washing time, rinsing mode
and spinning time.
Select the appropriate water
level that matches the load
volume. When this button
WATER
LEVEL
pressed, water level will be
changed alternately: HIGH,
MED, LOW 2 , LOW 1.
Used to set a variety of
OPTION
Soak program and Soft Spin
program
Press the water level button
CHILD
for 4 seconds to choose
SAFETY
desired child safety.
Signals of buzzer:
Buzzer will sound in the following cases :
The button is pressed
Washing cycle end
Have a trouble
How to cancel the cycle end buzzer :
Deleting : Turn on the POWER SWITCH and hold down the START / PAUSE button for 4 seconds.
Resetting : Turn on the POWER SWITCH and hold down the START / PAUSE button for 4 seconds.
In both cases, buzzer will sound to indicate that the program has been set.
About Automatic turn off function :
If you leave the washer turned on without starting the operation, the Power Switch will turn off
automatically after 10 minutes.
When washing operation finished, the POWER SWITCH will turn off in 5 seconds automatically.
Buzzer sounds beep in 0. 6 second.
:
Buzzer sounds with beep tone ON -0.5 second & OFF- 0.5 second for 6 seconds.
:
Buzzer sounds with beep tone ON -0.3 second & OFF -0.3 second in 16 times.
:
INDICATION OF LED
When you press the power switch to turn power ON, NORMAL
indicator will light up. When power is turned off, NORMAL
indicator will black out.
When you press the START/ PAUSE button to start, the
indicator of the first process will blink. When pausing, LED
indicator will light up.
Normal Heavy Duty
Setting Washing time:
OFF
Setting Rinsing mode:
0 1(water saver)
3.(3times overflow)
Setting Spinning time:
Normal/ Heavy Duty/ Custom course:
HIGH MED
Blanket: HIGH
Dry Care: MED
While selecting the option function, the indicator will light up.
If the option function is not selected, the indicator blacks out.
When this function is selected, Washing course will stop if
Washer Lid is opened 5 seconds or more during washing.
- 4 -
Custom Blanket Dry Care
1 12
1.(overflow) 2(twice water saver)
3(3times water saver)
0 10
LOW 2 LOW1
MED
HIGH LOW2
2.(once
shower +
once
overflow)