Procedure Of Time Presetting Program - Sanyo ASW U1100T Service Manual

8. Preset time program
Turn on the power switch (ON/OFF).
Load the laundry into the washer.
Turn the faucet on.
Press the ONE TOUCH SELECT to
select the washing course.
Press SELECT button four times
to enter the preset time program.
Press SET button to select preset
time.
Press START/ PAUSE button.
Preset time program begins working.
During presetting washing program, if the SET button is pressed, the indicator will light on to show the
content of preset washing program.
During presetting washing program, only SET button is affected when pressed.
On the Control Plate, the preset time indicator will blink on from 1-12 hours.
In case, to cancel the preset time, turn power switch off.
It is impossible to use the PRESET function on DRY CARE course.
HOW TO USE THE PRESET BUTTON
The PRESET time can be changed by
pressing the SET button.
6 hours
.
.
12 hours
No setting
1 hours
.
5 hours
To select a wash course
The selected preset time indicator will blink on.
When pressing the SET button, the preset time
indicator is changed from 1-12 (hours).
While the preset time program is selected, all
indicators except the PRESET (hour) indicator will
be automatically turned off in about 1 minute.
- 9 -