Adf Frame Unit - Epson Artisan 700 Service Manual

Epson Artisan 700/Epson Stylus Photo PX700W/TX700W

4.2.6.8 ADF Frame Unit

Parts/Components need to be removed in advance:
Scanner Unit/ADF Unit/ADF Cover Assy/ADF Right Cover/ADF Rear Cover/
ADF Cover Stacker/ADF Document Support Cover/ADF Front Cover/ADF
Document Support Assy
Removal procedure
1. Peel off the acetate tape (x2), and release the cable of the ADF Unit from the
ADF Base Assy.
ADF Base Assy
Acetate tapes
ADF Cable Cover
Figure 4-191. Removing the ADF Frame Unit (1)
DISASSEMBLY/ASSEMBLY
ADF Frame Unit
Cable of the ADF Unit
Groove
Disassembly Procedures
2. Remove the screws (x2) that secure the ADF Frame Unit.
3. Release the dowel (x1) of the ADF Base and the dowels
ADF Frame Unit, then remove the ADF Frame Unit from the ADF Base Assy.
ADF Base Assy
C.B.P. 3x8 (6±1kgfcm)
Positioning hole & dowel
Figure 4-192. Removing the ADF Frame Unit (2)
When installing the ADF Frame Unit, align the positioning
holes (x3) of the ADF Frame Unit and ADF Base Assy with the
dowels (x3) as shown in
Route the ADF Motor cable, ADF Sensor cable, and the
Grounding Wire as follows, referring to
1. Route them through the grooves (x3) of the ADF Base Assy.
2. Attach the ADF Cable Cover to the ADF Base Assy.
3. Secure the cables to the ADF Base Assy with acetate tape
(x2).
Revision C
(x2) of the
ADF Frame Unit
Fig. 4-192.
Fig. 4-191.
Confidential
180