Removing The Circuit Board (Artisan 700/Px700W/Tx700W); Panel Unit (Artisan 700/Px700W/Tx700W) - Epson Artisan 700 Service Manual

Epson Artisan 700/Epson Stylus Photo PX700W/TX700W
Align and insert the positioning hole of the Right Housing to the
dowel of the Base Frame. (See
Attach the Card Cover after installing the Right Housing to the
printer.
When attaching the Card Cover, insert the ribs (x2) of the Card
Cover to the inside of the Right Housing, and secure it with the
hooks (x2).
Right Housing
Card Cover
Figure 4-225. Attaching the Card Cover
DISASSEMBLY/ASSEMBLY
Fig. 4-222)
Hook
Rib
194
4.3.2 Removing the Circuit Board
TX700W
)

4.3.2.1 Panel Unit (Artisan 700/PX700W/TX700W)

The disassembly/reassembly procedures for Artisan 800/PX800FW/
C H E C K
TX800FW differ from those of Artisan 700/PX700W/TX700W, see
P O I N T
4.2.3.1 "Panel Unit" (p115)
Parts/Components need to be removed in advance:
Scanner Unit/Upper Left Housing/Paper Guide Top Assy/Upper Housing
Removal procedure
1. Open the Panel Unit. (See Fig.
2. Lift the Right Hinge and detach the Panel FFC Guide from the Upper
Housing.
Panel Unit
Panel FFC Guide
Figure 4-226. Removing the Panel Unit (1)
Revision C
Artisan 700/PX700W/
(
for the procedures.
4-226.)
Right Hinge
Confidential