Banding Reduction System (Brs) Adjustment / Paper Feed Amount Profile (Pfp) Correction - Epson Artisan 700 Service Manual

Epson Artisan 700/Epson Stylus Photo PX700W/TX700W
5.2.10 Banding Reduction System (BRS) Adjustment /
Paper Feed Amount Profile (PFP) Correction
Overview
This section explains how to carry out BRS/PFP adjustments.
To calculate the correction value by scanning the printed pattern
C H E C K
for BRS/PFP adjustment, be sure to prepare a specified scanner
P O I N T
beforehand. Before scanning, confirm that the document table is
free from any dirt or stain.
Tools and paper required to perform the adjustment
Table 5-5. Tools and Paper for BRS/PFP Adjustment
Common PFP Base scale
BRS Matte Paper-Heavyweight (A4)
PFP Premium Glossy Photo Paper (4 x 6)
ADJUSTMENT
Tools/Paper Product Code
1453980
---
---
Adjustment Using Adjustment Program
Specified Scanner to perform the adjustment
Install the driver of the scanner to the PC in advance.
C A U T I O N
As the profile required for the adjustment is not prepared for
scanners other than the ones specified below, BRS/PFP
Adjustment can not be carried out by the other scanners.
The following are the scanners that can be used for scanning the pattern in BRS/PFP
adjustment. When starting up the adjustment program, select the scanner to use.
Table 5-6. Specified Scanner for BRS/PFP Adjustment
Model Name
Perfection 4990 Photo
Perfection V700 Photo/V750 Pro
Epson Stylus Photo RX585/RX595/RX610
Epson Artisan 800/Epson Stylus Photo
PX800FW/TX800FW
Epson Artisan 700/Epson Stylus Photo
PX700W/TX700W
Depending on the sensor type of the scanner to use for the
C H E C K
adjustment, drying time required after the BRS adjustment pattern
P O I N T
has been printed differs. For PFP adjustment pattern/PFP check
pattern, drying time is not required.
For "CCD" sensor:
Printed pattern can be scanned straight away. (Drying time of
about 2 minutes is recommended.)
For "CIS" sensor:
Printed pattern needs to be dried more than 5 minutes.
Test Pattern Scanner
Figure 5-23. System Configuration
Revision C
Sensor type Remarks
CCD
CCD
CIS Use the internal scanner.
CIS Use the internal scanner.
CIS Use the internal scanner.
Calculate
correction
value
PC Printer
230
Confidential