Front Frame; Ej Frame Assy / Ej Release Frame Assy R/ Ej Release Frame Assy L - Epson Artisan 700 Service Manual

Epson Artisan 700/Epson Stylus Photo PX700W/TX700W

4.2.4.12 Front Frame

The Main Frame becomes unstable once it is removed from the
C H E C K
Base Frame. Be careful not to deform the frame during
P O I N T
performing the following procedures.
Refer to 4.2.4.11 Main Frame (p144)
need to be removed before removing the Main Frame.
Parts/Components need to be removed in advance:
Main Frame
Removal procedure
1. Remove the screw (x1) that secures the FFC Holder, and remove the FFC
Holder. (See Fig. 4-109.)
2. Remove the screws (x2) that secure the Front Frame, and remove the Front
Frame.
Front side
Figure 4-109. Removing the Front Frame
Align the positioning holes (x2) of the Front Frame with dowels (x2)
of the Main Frame. (See
DISASSEMBLY/ASSEMBLY
for the Parts/Components
FFC Holder
Positioning hole & dowel
Front Frame
C.B.P. 3x8 (6±1Kgfcm)
C.B.S. 3x4 (8±1Kgfcm)
Fig. 4-109)
4.2.4.13 EJ Frame Assy / EJ Release Frame Assy R/
EJ Release Frame Assy L
The Main Frame becomes unstable once it is removed from the
C H E C K
Base Frame. Be careful not to deform the frame during
P O I N T
performing the following procedures.
Refer to
need to be removed before removing the Main Frame.
Parts/Components need to be removed in advance:
Main Frame/Front Frame
Removal procedure
1. Remove the securing ring from the EJ Frame Shaft and remove the Spur Gear
A. (See Fig.
2. Remove the screw (x1) that secures the EJ Release Frame Assy R, and
remove the EJ Release Frame Assy R.
Figure 4-110. Removing the EJ Release Frame Assy R
Disassembly Procedures
4.2.4.11 Main Frame (p144) for the Parts/Components
4-110.)
EJ Frame Shaft
Spur Gear A
Securing ring
EJ Release Frame Assy R
Revision C
Positioning hole & dowel
C.B.S. 3x6 (8±1Kgfcm)
147
Confidential