Using The Focus Function - Yamaha CL5 Reference Manual

Using the Focus function

"Focus" is a function that lets you specify the parameters that will be updated when you recall a scene.
This function is useful if you want to recall only the input channel settings of a specific scene.
NOTE
In contrast to Focus, the CL series console features a "Recall Safe" function that enables you to
exclude specific channels and parameters from recall operations. However while the Focus
function is specified for each scene, Recall Safe settings are applied to all scenes.
1.
Press the SCENE field in the Function Access Area.
The SCENE LIST window will appear, in which you can perform various operations for scene
memory.
2.
Press the FOCUS tab at the bottom of the SCENE LIST window.
The FOCUS field will appear in the right half of the SCENE LIST window.
The FOCUS field enables you to make settings for the Focus function.
The buttons in this field correspond to the scene list shown on the left side of the SCENE LIST
window.
The CURRENT SETTING field lets you make Focus settings that will be used the next time you
perform a Scene Store operation.
3.
Press the SET button for the scene you want to set.
The FOCUS RECALL popup window will appear. The window contains the following items.
2
1
CLEAR ALL button
Clears all the settings.
■ Focus channel display field
Indicates the target channel for a Recall operation. The view of this field is the same as that in the
RECALL SAFE popup window.
To add channels as the target, turn the SET BY SEL button
[SEL] keys for the desired channels.
2
SET BY SEL button
Turn on this button to add a channel by using the corresponding [SEL] key.
NOTE
In the case of the CL3/CL1, channels that do not exist on those models will not be shown.
■ Channel focus parameter display field
Enables you to select parameters for each channel that will be affected by Recall operations. You can use
the same procedure as that in the RECALL SAFE popup window.
3
FOCUS button
Switches the Focus Recall function on or off.
■ GLOBAL FOCUS PARAMETER field
Indicates the parameters and racks that will be affected by Recall operations for any scene. Procedures
and contents are the same as those in the RECALL SAFE MODE popup window.
86
Scene memory
1
3
2
on, and then press the corresponding
Reference Manual