User Defined Knobs - Yamaha CL5 Reference Manual

USER DEFINED knobs

This section explains how to assign the desired functions to the USER DEFINED knobs in the USER
DEFINED KNOBS section on the top panel, and press these knobs to execute the defined function.
This assignment procedure will define the USER DEFINED knobs for the user who is currently logged-
in, but if you are logged-in as the Administrator, you can also make USER DEFINED knob settings for
the Guest account.
1.
In the Function Access Area, press the SETUP button to access the SETUP screen.
2.
Press the USER SETUP button to access the USER SETUP popup window.
3.
Press the USER DEFINED KNOBS tab to select the USER DEFINED KNOBS page.
If you are logged-in as the Administrator, you can also select the USER DEFINED KNOBS and
ASSIGNABLE ENCORDER for GUEST page to make USER DEFINED knob settings for the
Guest account.
The four on-screen buttons correspond to USER DEFINED knobs [1]–[4] on the top panel. The
name of function or parameter assigned to each key appears to the right of the corresponding on-
screen button. If nothing is assigned to the knob, an indication of "---" will appear next to the
button.
4.
Press the button corresponding to the USER DEFINED knob to which you want to
assign a function.
The USER DEFINED KNOB SETUP window will appear. In this window you can select a
function to assign to the USER DEFINED knob, and select optional parameters.
NOTE
The list shown is the same for all models of the CL series.
For the CL3/CL1, the display will indicate "Cannot Assign!" if you specify a parameter that does
not exist on that model.
5.
Make sure that the FUNCTION field is enclosed by a frame, then use the
buttons in the lower part of the field or the multifunction knobs on the top panel
to select the function you want to assign.
For details on the assignable functions and their parameters, refer to
assigned to USER DEFINED knobs" on
6.
If the selected function has parameters, press the PARAMETER 1 or 2 field to move
the frame, then select parameters 1 and 2 in the same way.
7.
Press the OK button to close the USER DEFINED KNOB SETUP window.
8.
Assign the desired functions to other USER DEFINED knobs in the same way.
9.
To execute an assigned function, press the corresponding USER DEFINED [1]–[4]
knob on the panel.
About TOUCH AND TURN
The TOUCH AND TURN function is assigned to the USER DEFINED [4] knob by
default. If this function is assigned to one of the USER DEFINED knobs, you can
press a desired knob on the touch screen and then use the USER DEFINED knob to
immediately operate that on-screen knob.
At this time, a pink frame is shown around the knob in the touch screen, indicating
that you can operate that knob.
166
User settings (Security)
"Functions that can be
page 246.
Reference Manual
/