First Time Setup - Culligan HE Twin Water Softener Owner's Manual

First Time Setup Procedure
The HE Twin Controller is designed to simplify the setup and installation process by making some default
recommendations during the initial setup. These default settings are appropriate for most common installa-
tions.
After completing the plumbing connections to the water softener, turn on and program the HE Twin Con-
troller.

FIRST TIME SETUP

PRESS DOWN ARROW
Serial Number
S/N: 00000123
Firmware Version
FWR***LT21
MON DD YEAR
Set Month (Jan–Dec)
SET MONTH
JAN
Set Day (0–31)
SET DAY
>1
Set Year (2009–2030)
SET YEAR
>2012
When a new HE Twin Controller is first turned on, the screen displays FIRST
TIME SETUP. Press to display the first setup screen.
The screen displays the serial number for this Smart Controller. Press
display the firmware version information screen.
NOTE If this unit will be installed with a modem, it is
required that this electronic ID number be reported
to Culligan on the IQR form.
The screen displays the firmware version and date installed for this Smart
Controller. Press to display the month setup screen.
The screen displays the month setting. Press
displayed (and view the next setting), or Press
the setting and advance to the next setting, SET DAY.
The screen displays the day setting. Press
played (and view the next setup screen), or press
Press to see the next available value. Press
and advance to the next setting, SET YEAR.
The screen displays the year setting. Press
played (and view the next setup screen), or press
Press to see the next available value. Press
and advance to the next setting, CLOCK TYPE.
to
to accept the information
or to change
to accept the information dis-
to change the setting.
to accept the selected day
to accept the information dis-
to change the setting.
to accept the selected year
First Time
Setup
01023052
31