Inspection; Installation - Samsung SVMi-4 Technical Manual And User Manual

SVMi-4 Installation - Page 31

Inspection

Unpack and inspect the card for obvious damage. The card should be labelled
SVMi-4. If it is not, you have the wrong card.

Installation

The SVMi-4 card is installed in any universal slot in the Compact II or iDCS100.
The first thing you should do before proceeding is to discharge any static elec-
tricity you may have gathered by touching a ground point such as the cover of
the KSU power supply. When you have done this, check the power switch on the
KSU and ensure that the switch is in the OFF position. Next, position the card
in the grooves of the card guide and gently slide the card in until it makes con-
tact with the connector. Press gently but firmly on the top and bottom of the
front edge of the card until the card seats in its connector.
The power to run this self-contained Voice Mail system comes from the phone
system power supply. No special power considerations are necessary. The KSU
can now be turned on.
Finally, press the Reset button on the front of the SVMi-4 card.