Samsung
SVMi-4 and SVM-400 Manual
SMDR START/DTMF
ROUTE OPTIMISE
SYS HOLD RECALL
TRANSFER RECALL
UCDS AUDIO ALM
UCDS VISUAL ALM
MMC: 501
This grace period timer starts SMDR recording for touchtone dial-
ling. This timer also controls the LCD duration timer on the key-
sets. The duration time displayed and the SMDR time duration will
be the same.
When a call is made via Q-SIG signalling, route optimisation is
activated after this time.
Determines the time calls can be left on hold before recalling to
the holding station. Setting this timer to '000' means that no recall-
ing will take place.
Determines the time that transferred calls ring before recalling.
When an AA card is installed and the digital UCD package en-
abled, this counter determines the maximum time a call will wait
at the UCD group before the UCD group's SUPV key begins to
flash along with an audio alarm.
When an AA card is installed and the digital UCD package en-
abled, this counter determines the maximum time a call will wait
at the UCD group before the UCD group's SUPV key begins to
flash as an alarm.
Programming
MMCs