Table of Contents
Advertisement
3
Correcting text and input precautions
G
To erase all entered text, press the [Panel Reset] key.
G
To delete only part of the entered text, use the [ ] and [Ö ] keys to move the
cursor (_) to the character that you wish to delete, and then press the [No] key.
G
To change an entered character, use the [ ] and [Ö ] keys to move the cursor
(_) below the character that you wish to change, and then press the [No] key.
Next, enter the new character. (The character at the cursor's position is
replaced with the new character.)
G
If the same 10-Key Pad is needed to enter two characters in a row, press the
[Ö ] key after selecting the first character. (Refer to the above example.)
G
To enter a space, press 10-Key Pad [0].
3-20
3.7 Entering Text
Advertisement
Table of Contents
